5-444
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsptoneplan
dsptoneplan
To display the tone configuration of a specified tone plan—either a built-in (preconfigured) or a
provisional tone plan—use the dsptoneplan command in the VoIP switching/trunking and switched
AAL2 PVC operating modes.
dsptoneplan tonep-region tonep-version
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines This command displays amplitudes as a number which corresponds to a dBm value according to the
following formula:
dBm = 20 * log10 (peek-to-peek/46348)
This formula equals the amplitude of one frequency. If both freque nc ies ar e co nfigur ed fo r th e same
level, add 6 dBm to the results of the formula to obtain the total amplitude.
Examples The following example shows that the tone configuration for singapo re tone plan region, version number
11, is displayed:
dsptoneplan singapore 11
Region Name :Singapore
Version: 1
Description: Tone Plan for Singapore (SG)
File name: BUILTIN
Related Commands
tonep-region Tone plan country or region for which you want to display the tone
configuration. It can be in the range from 1 to 64 alphanumeric char acters and
can contain underscores ( _ ). This value is case sensitive.
tonep-version Tone plan version number of the tone plan country or region for which you
want to display the tone configuration. It can be in the range fro m 1 t o 6553 5.
Command Description
addtoneplan Adds a tone plan to the current VISM card.
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
cnflntonetimeout Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
deltoneplan Deletes a previously added tone plan from the current VISM card.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.