5-166
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflndigitorder
cnflndigitorder
To assign the order in which automatic number identification (ANI) digits—the caller’s number—and
dialed number identification service (DNIS) digits—the called number—are dialed during an outgoing
Feature Group D (FGD) call on the endpoints of a specified VISM card line, use the cnflndigitorder
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnflndigitorder line-num digit-order
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines The ANI and DNIS digits are sent as part of the MGCP setup message.
Examples The following example shows that the current VISM card’s line number 7 is assigned a digit order of
DNIS digits first, followed by ANI digits, for digits dialed during an outgoing FGD call:
cnflndigitorder 7 2
Related Commands
line-num Line number for which to configure dialed digit order. In the range from 1 to 8.
digit-order ANI and DNIS digit order. It can be one of the following values:
•1 = ANI digits followed by DNIS digits.
•2 = DNIS digits followed by ANI digits.
Command Description
cnfcasflashtime Configures the minimum and maximum CAS on-hook time pe riod s f or
incoming flash hooks on a specified endpoint.
cnfcasglareattrib Configures the direction of CAS calls and the glare policy for a specified
endpoint.
cnfcaspackage Configures MGCP packages to notify persistent observed CAS events in the
context of incoming and outgoing CAS calls on a specified endpoin t.
delxgcppersistevt Deletes a persistent xGCP event.
dspcasglareattrib Displays the direction of CAS calls and the glare policy for a specified
endpoint.
dspcaspackage Displays the MGCP packages configured to notify persistent observed CAS
events in the context of incoming and outgoing CAS calls on a specified
endpoint.
dspcastimers Displays the currently configured CAS timers for a specified endpoint.
dsplndigitorder Displays the order in which ANI digits and DNIS digits are dialed during an
outgoing FGD call on the endpoints of a specified VISM card line.