5-325
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcids
dspcids
To display all AAL2 channel identifiers (CIDs) for an LCN on the current VISM card, use the dspcids
command in the switched AAL2 PVC and AAL2 trunking opera ting mod es.
dspcids lcn
Syntax Description
Command Modes Switched AAL2 PVC and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the AAL2 CIDs are displ aye d f or L CN 13 2:
dspcids 132
lcn CID Endpt Cid Type3 VAD Prof Prof Codec Cas DTMF
Num Num Num Status Redun VAD Timer Type Num Type Tran Tran Ecan
--- --- ----- ------ ----- --- ----- ------ ---- --------- ---- ---- ----
132 9 1 active ena ena 250 ITU 1 G.711u ena ena ena
Related Commands
lcn Logical channel number of the LCN for which you want to display AAL2 CIDs. It can
be in the range from 131 to 510.
Command Description
addcid Adds an AAL2 CID on a VISM card.
delcid Deletes the association between an endpoint and an LCN/CID pair.
dspcid Displays the configuration data of an AAL2 CID on the current VISM card.