5-327
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcodecjtrdelays
dspcodecjtrdelays
To display the configured codec jitter delay modes and associated jitter initial delays, use the
dspcodecjtrdelays command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspcodecjtrdelays
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configured codec jitter delay modes and associated jitter initial
delays are displayed:
dspcodecjtrdelays
Codec JitterDelayMode JitterInitialDelay
----- --------------- ------------------
G7.11u fixed 100
.
.
.
Related Commands Command Description
cnfcodecjtrdelay Configures the jitter delay mode and initial delay value for a specified codec.