5-279
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dncon
dncon
To configure a specified connection down, preventing traffic from being passed to the specified
connection, use the dncon command in the VoIP switching/trunking, switched AAL1 SVC, switched
AAL2 SVC, switched AAL2 PVC, AAL2 trunking, VoIP and switched ATM AAL1 SVC operating
modes.
dncon lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines If you use this command and the previous channel state is active (up), a connection down trap is sent.
Examples The following example shows that connection 188 is configured t o be a dmin istr atively down and no
traffic is passed to it:
dncon 188
Related Commands
lcn The logical channel number. It can be in the range from 131 to 5 10.
Command Description
dspcon Displays the parameters for a specified channel.
upcon Configures a specified connection up, allowing traffic to be passed to the specified
connection.