5-62
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clrsarmsgcnt
clrsarmsgcnt
To clear the control message counters from a VISM card, use the clrsarmsgcnt command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
clrsarmsgcnt
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures when you use this command.
Examples The following example shows that the SAR control messa ge cou nters ar e clea red fr om the cu rrent VISM
card:
clrsarmsgcnt
Related Commands Command Description
dspsarmsgcnt Displays the SAR control message counter values for a VISM card.