5-47
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addtoneplan
Note If you do not specify the amplitudes of DTMF or MFR1 tones, t he d efau lt value of 1 6384
(–9 dBm) is applied.
The appropriate tone plan file, with associated region and version, is downloaded, parsed, and stored in
memory when you use this command.
Examples The following example shows that the tone plan file name singp _3, wi th r egion s in gap ore a nd version
number 11, is added to the current VISM card:
addtoneplan singapore 11 singp_3
Related Commands
cadence-4-on (Optional) The fourth on time that the tone plays, defined in milliseconds.
cadence-4-off (Optional) The fourth off time that the tone does not play, defined in
milliseconds.
1. To specify amplitudes of DTMF and MFR1 tones, you must use the following syntax: dtmf_digit amp-low amp-high or
mf_r1_digit amp-low amp-high. The amp-low value = low group frequency. The amp-high value = high group frequency.
Table5-1 Tone Plan Definition File Syntax (continued)
Syntax Item Description
Command Description
cnflnringback Configures the ringback tone method for a specified line on the current VISM
card.
cnflntoneplan Assigns a tone plan to a specified VISM card line.
cnflntonetimeout Modifies the timeout periods of all call progress tones supported by VISM on
a specified VISM card line.
dellntoneplan Deletes the tone plan configuration of a specified VISM card line.
deltoneplan Deletes a previously added tone plan from the current VISM card.
dsplnringback Displays the ringback tone method for a specified line on the current VISM
card.
dsplntoneplan Displays the tone plan configuration of a specified VISM card line.
dsplntonetimeout Displays the configured timeout periods for all call progress tones of a
specified VISM card line.
dsptonebuiltinplans Displays all preconfigured (built-in) tone plans on the current VISM card.
dsptoneplan Displays the tone configuration of a specified tone plan—either a
preconfigured (built-in) or user-added tone plan.
dsptoneplans Displays the tone configuration of all tone plans—either preconfigured
(built-in) or user-added tone plans.
dsptoneprovplans Displays all user-added (provisional) tone plans.
dsptoneregionplans Displays a list of all tone plans for the countries and regions whose name
partially or completely matches the name you supply.