5-336
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspdisctimers
dspdisctimers
To display the Restart in Progress command disconnect type method wait delay times, use the
dspdisctimers command in the VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC,
switched AAL2 PVC, AAL2 trunking, VoIP and switched ATM AAL1 SVC operating modes.
dspdisctimers
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the Restart in Progress command disconnect type method wait delay
times are displayed:
dspdisctimers
Initial Waiting Delay: 15secs
Min Waiting Delay: 15 secs
Nax Waiting Delay: 600 secs
Related Commands Command Description
addmgcgrpprotocol Associates a call agent redundancy group to a gateway control protoco l.
cnfdisctimers Specifies the wait delay times for the disconnected procedure, restart in
progress command—initial, minimum, and maximum timer values.
cnfmgcgrpprotocol Configures call agent group protocol data.
cnfxgcppeer Configures the UDP port number used to send gateway-initiated messages to
the call agent.
delmgcgrpprotocol Deletes an MGCP from a specified call agent redundan cy group .