5-435
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsrcpretry
dspsrcpretry
To display the VISM card level Simple Resource Control Protocol (SRCP) retransmission
parameters—maximum number of retransmission attempts, minimum timeout, and maximum
timeout—use the dspsrcpretry command in the VoIP switching/trunking and switched AAL2 PVC
operating modes.
dspsrcpretry
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the VISM card level SRCP retransmission parameters are displayed:
dspsrcpretry
Min Request Timeout : 500
Retry Count : 3
Max Request Timeout : 500
Related Commands Command Description
dspsrcpcnt Displays the SRCP message counters (statistics) for a specified call agent.
dspsrcpcnts Displays SRCP message counters (statistics) for all known call agents.
dspsrcppeer Displays the peer configuration data for a specified SRCP peer (call agent).
dspsrcppeers Displays the peer configuration data for all known SRCP peers (call agents).
dspsrcpport Displays the local UDP port number used by the SRCP on VISM.