5-387
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspmidcalltimers
dspmidcalltimers
To display the configured partial and critical timer va lues for midca ll dual ton e multifreq uenc y (DTMF)
digit reporting, use the dspmidcalltimers command in the VoIP switching/trunking, switched AAL2
PVC, and AAL2 trunking operating modes.
dspmidcalltimers
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configured partial and critical timers for midcall DTMF digit
reporting are displayed:
dspmidcalltimers
LineNum DTMF Partial Timer DTMF Critical Timer
------- ------------------ -------------------
1 16 4
2 20 4
Related Commands Command Description
cnfmidcalltimers Configures the midcall DTMF feature partial and critical timers for a specified
VISM card line.