5-392
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspnwcot
dspnwcot
To display the status—enabled or disabled—of the gateway-initiated network continuity test
configuration for VISM, use the dspnwcot command in the VoIP switching/trunking and switched
AAL2 PVC operating modes.
dspnwcot
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that VISM is configured for a gateway-initiated network continuity test:
dspnwcot
GW Initiated Network COT: On
Related Commands Command Description
cnfco4timer Configures the bearer continuity test CO4 timer value.
cnfnwcot Configures VISM for a gateway-initiated network continuity test.
dspco4timer Displays the bearer continuity test CO4 timer value.
dspvismparam Displays the current VISM card configuration.