5-274
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delsesset
delsesset
To delete a PRI backhaul session set, use the delsesset command in the VoIP switching/trunking and
switched AAL2 PVC operating mode.
delsesset set-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines You must delete all session groups in the session set before you use this command to delete the session
set.
Examples The following example shows that session set number 1 is deleted:
delsesset 1
Related Commands
set-num Identifying session set number. It can be in the range from 1 to 16.
Note Currently, only session set number 1 is supported.
Command Description
addsesset Adds a PRI backhaul session set between a VISM card and a call agent.