5-428
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspslipcnt
dspslipcnt
To display the current clock slip counters for a specified VISM card line, use the dspslipcnt command
in the VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC,
AAL2 trunking, VoIP and switched ATM AAL1 SVC trunking operating modes.
dspslipcnt line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the current clock slip counter s for line 3 of the current VISM card are
displayed:
dspslipcnt 3
Line 3 Slip Counters: Tx Slip Rx Slip
Uncontrolled Slip: 0 0
Frame Slip: 0 2
Related Commands
line-num Line number of the DS1 line for which you want to di spla y th e cu rrent cloc k slip
counters. It can be in the range from 1 to 8.
Command Description
clrslipcnt Clears current clock slip counters for a specified VISM card lin e.