5-480
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcplncons
dspxgcplncons
To display the DS0s with active xGCP connections, the number of connections for each line, and the
number of active calls for each card, use the dspxgcplncons command in the VoIP switching/trunking
and switched AAL2 PVC operating modes.
dspxgcplncons
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the DS0s with active xGCP connections, the number of conn ec tio ns
for each line, and the number of active calls for each card are displayed:
dspxgcplncons
Connections Active Line 1: 0x00bee89e (15)
Connections Active Line 2: 0x00b5bfc5 (16)
Connections Active Line 3: 0x0015387c (11)
Connections Active Line 4: 0x00000000 (0)
Connections Active Line 5: 0x00000000 (0)
Connections Active Line 6: 0x00000000 (0)
Connections Active Line 7: 0x00000000 (0)
Connections Active Line 8: 0x00000000 (0)
Total Active Connections: 42
Note The hexadecimal digits indicate the DS0s on which the connections exist. The pa renthetical numbers
indicate the total number of active DS0s on a line. The last line of the displayed data indicates the
total number of active connections.
Related Commands Command Description
delxgcpcon Deletes an xGCP connection specified by the xGCP connection identification
number.
dspxgcpcids Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the g ate w ay.
dspxgcpcon Displays the attributes associated with a call agent established connection.
dspxgcpcons Displays the xGCP connection ID, endpoint name and call ID corresponding
to each call agent established connection on the gateway.
dspxgcpendpt Displays the attributes associated with an endpoint.
dspxgcpendptcons Displays the attributes of all connections associated with an endpoint.
dspxgcpendpts Displays the xGCP endpoint names of all endpoints added with the addendpt
command, or the SNMP equivalent.