5-20
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addendpt
This command sends an RSIP message to each associated call agent indicating that the en dpoint is in
service.
Examples The following example adds an endpoint with the n umb er 120, on l ine 5 , DS0 n umb er 5:
addendpt 120 5 5
Related Commands Command Description
addendpts Adds multiple sequential endpoints to a VISM card.
delendpt Deletes a specified endpoint on a VISM card.
dspendpt Displays information about a specified endpoint on a VISM card.
dspendpts Displays information about all the endpoints on a VISM card.