5-317
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcasvars
dspcasvars
To display the parameters of all channel assoc iated signali ng (CAS) v ariant s conf igured on a VISM card,
use the dspcasvars command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspcasvars
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines This command displays the following data for each CAS variant:
•Vari ant nam e
•File name
•Digit method
•Country code
Examples The following example shows that the parameters of all configured CAS variants are displayed for the
current VISM card:
dspcasvars
VariantName FileName DigitMethod CountryCode
----------- -------- ----------- -----------
first wink.dod DTMF US
second ring.dod DTMF US
Related Commands Command Description
addcasvar Adds a CAS variant to a VISM card.
cnfcasvar Configures CAS variant and CAS timing parameters for a variant already created
with the addcasvar command.
delcasvar Deletes a CAS variant.
dspcasvar Displays information about CAS variants for a given variant name.