5-304
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcacfailcntrs
dspcacfailcntrs
To display the connection admission control (CAC) failure counters that are set to 0, use the
dspcacfailcntrs command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspcacfailcntrs
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Use this command for debugging purposes—to reset counters and isolate VISM CAC-related failures.
Counter values greater than 0 indicate that the gateway is low on resources.
Examples The following example shows that the CAC failure counters that are se t to 0 are di spla yed:
dspcacfailcntrs
PVC Addition Failures :0
SVC Addition Failures :0
VC CAC Failures for PVCs :0
PVC Upspeed Failures :0
SVC Upspeed Failures :0
Related Commands Command Description
clrcacfailcntrs Resets the CAC failure counters to 0.