5-381
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspmgc
dspmgc
To display the configuration data of a specified Media Gateway Control (MGC), use the dspmgc
command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dspmgc mgc-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for the MGC identified by the MGC number 1
is displayed:
dspmgc 1
mgcNumber : 1
mgcName : mgc1
Related Commands
mgc-num A number by which the call agent is identified, as displayed by the dspmgcs
command, in the range from 1 to 8.
Command Description
delmgc Deletes a call agent from a VISM card.
dspmaxmgcs Displays the maximum number of MGCs that can be configured on the current card.
dspmgcs Displays the configuration data of all configured call agents.