5-343
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspds0localcasstatus
dspds0localcasstatus
To display the currently configured local channel associated signaling (CAS) status for a specified line
and DS0, use the dspds0localcasstatus command in the VoIP switching/trunking, switched AAL2 PVC,
and AAL2 trunking operating modes.
dspds0localcasstatus line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the currently configured local CAS status for line number 1, DS0
number 1 is displayed:
dspds0localcasstatus 1 1
ds1 line number: 1
ds0 number: 1
ds0 If Index: 1
local cas type: Disabled
local cas 4 bit bit pattern: 0
Related Commands
line-num Line number of the channel for which you want to displa y t he cur re ntly lo cal CAS
status. It can be in the range from 1 to 8.
ds0-num DS0 number of the channel for which you want to display the currently local CAS
status. It can be a value from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
Command Description
cnfds0localcas Configures a local CAS 4-bit pattern for a T1 line and DS0.