5-339
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspdns
dspdns
To display the configuration data of all domain names of a call agent, use the dspdns command in the
VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspdns
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data of the mgc1 domain name are displayed:
dspdns
DomainNumber DomainName IP State Preference Resolution Type
------------ ---------- ----------- ----- ---------- ---------------
1 mgc1 nn.nn.nn.nn Active 1 internal only
Related Commands Command Description
adddn Adds a domain name (call agent name) and optionally configures the resolution type
of the domain name.
adddnip Adds the IP addresses for a domain name that you added by usi n g the adddn
command.
cnfdn Configures the resolution type of a specified domain name.
cnfdnssrvr Designates a domain name as a DNS.
deldn Deletes a domain name.
delnip Deletes a statistically provisioned IP address of a domain name.
dspdnallips Displays all statistically provisioned IP addresses and externally resolved IP
addresses for all domain names configured on the current VISM card.
dspdnips Displays all statistically provisioned and externally resolved IP addresses configured
for a specified domain name.
dspdnssrvr Displays the domain name of the configured DNS of the current VISM card.