5-488
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
tstdelay
tstdelay
To test the delay on a specified connection, use the tstdelay command in the VoIP switching/trunking,
switched AAL2 PVC, and AAL2 trunking operating modes.
tstdelay lcn
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the delay for the connection identified by logical channel number 136
is tested:
tstdelay 136
Related Commands
lcn Logical channel number of the connection for which to test the delay. It can be a value
in the range from 131 to 510.
Command Description
tstcon Tests a specified connection.