5-433
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsrcppeers
dspsrcppeers
To display the peer configuration data for all known Simple Resource Control Protocol (SRC P) pe er s
(call agents), use the dspsrcppeers command in the VoIP switching/trunking operating mode.
dspsrcppeers
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the configuration data for all known SRCP peers (call agents) are
displayed:
dspsrcppeers
Related Commands Command Description
dspsrcpcnt Displays the SRCP message counters (statistics) for a specified call agent.
dspsrcpcnts Displays SRCP message counters (statistics) for all known call agents.
dspsrcppeer Displays the peer configuration data for a specified SRCP peer (call agent).
dspsrcpport Displays the local UDP port number used by the SRCP on VISM.
dspsrcpretry Displays the card level SRCP retransmission parameters—maximum number
of retransmission attempts, minimum timeout, and maximum timeout.