5-476
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpendptcons
MGC IP Address = Unknown
MGC UDP Port = 2427
Port in Notified Entity = FALSE
Protocol Version = MGCP 0.1
Silence Suppression = TRUE
VAD Timer = 250
CAS Forwarding Backhaul = 0
Triple Redundancy = 1
DTMF forwarding = 0
Local Connection Options (lco string) = L:e:on
Remote Session Descriptor (sdp string) =
Timestamp Information:
Display Type = Terminating
CRCX Ack (CRCX Ack - CRCX) = 10.000000000 ms
Time since the CRCX was received = 210.280000000 sec
(CRCX Command is not shown since it is used as reference)
Codec List:Codec[1] = PCMU
Pkt. Period List[1]:Pkt. Period[1] = 10 ms
Pkt. Period Range[1] - Low = 10 ms
Pkt. Period Range[1] - High = 10 ms
Codec List:Codec[2] = PCMA
Pkt. Period List[2]:Pkt. Period[1] = 10 ms
Pkt. Period Range[2] - Low = 10 ms
Pkt. Period Range[2] - High = 10 ms
Codec List:Codec[3] = CCD
Pkt. Period List[3]:Pkt. Period[1] = 10 ms
Pkt. Period Range[3] - Low = 10 ms
Pkt. Period Range[3] - High = 10 ms
LCO Pkt. Period Range - Low = 0 ms
LCO Pkt. Period Range - High = 0 ms
TDM Endpoint Connected to DSP Channel = TRUE
DSP Channel Connected to Network Endpoint = TRUE
Related Commands Command Description
delxgcpcon Deletes an xGCP connection specified by the xGCP connection identification
number.
dspxgcpcids Displays the LCN, CID, xGCP connection ID, endpoint name, and call ID
corresponding to each call agent established AAL2 connection on the gateway.
dspxgcpcon Displays the attributes associated with a call agent established connection.
dspxgcpcons Displays the xGCP connection ID, endpoint name and call ID corresponding to
each call agent established connection on the gateway.
dspxgcpendpt Displays the xGCP endpoint names corresponding to each endpoint n umber.
dspxgcpendpts Displays the xGCP endpoint name corresponding to each endpoint added using the
addendpt command or the SNMP equivalent.