5-259
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delln
delln
To delete a DS1 line on a VISM card, use the delln command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
delln ds1-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines You must delete endpoints and CCS channels from the line before the line ca n b e de lete d.
Examples The following example shows that line number 4 is deleted:
delln 4
Related Commands
ds1-num Physical line number in the range from 1 to 8.
Command Description
addln Adds a T1 or E1 line to a VISM card.
cnfln Configures characteristics for a VISM card line.
dspln Displays the characteristics of a specified VISM card line.
dsplns Displays the characteristics for all lines on a VISM card.