5-159
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflapdtrunkpvc
cnflapdtrunkpvc
To assign the permanent virtual circuit (PVC) trunk type that carries Link Ac cess Prot ocol D channel
(LAPD) messages for the current VISM card, use the cnflapdtrunkpvc command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnflapdtrunkpvc lapd-trunk-type
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the current VISM card is assigned the control PVC trunk ty pe to carry
LAPD messages:
cnflapdtrunkpvc 1
Related Commands
lapd-trunk-type LAPD trunk PVC type. It can be one of the following values:
•1 = Control
•2 = Bearer (Default)
Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
addrudptrunk Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI back haul R UDP
trunk for a specified session.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LA PD.
dsplapd Displays data about an LAPD.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.
dsprtpcnt Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.