5-64
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clrslipcnt
clrslipcnt
To clear current clock slip counters for a specified VISM card line, use the clrslipcnt command i n the
VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC trunking operating modes.
clrslipcnt line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL1 SVC, switched AAL2 SVC, switched AAL2 PVC, AAL2
trunking, VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the current clock slip counter s for line 3 of the current VISM card are
cleared:
clrslipcnt 3
Line 3 Slip Counters: Tx Slip Rx Slip
Uncontrolled Slip: 0 0
Frame Slip: 0 2
Related Commands
line-num Line number of the DS1 line for which you want to clear current cloc k s lip co unte rs .
It can be in the range from 1 to 8.
Command Description
dspslipcnt Displays the current clock slip counters for a specified VISM card line.