5-310
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcaspackage
dspcaspackage
To display the Media Gateway Control Protocol (MGCP) packages configured to notify persistent
observed CAS events in the context of incoming and outgoing CAS calls on a sp eci fied en dpoin t, u se
the dspcaspackage command in the V oIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
operating modes.
dspcaspackage endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the MGCP packages for incoming and outgoing calls on endpoi nt
number 49 are displayed:
dspcaspackage 49
Ds0fIndex: 49
incoming CAS Pkg: MS
Outgoing CAS Pkg: DT
endpt-num Endpoint number for which you want to display the CAS packages. It can be a
value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144