5-342
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspds0gain
dspds0gain
To display the adjustable gain values for a specified DS0, use the dspds0gain command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspds0gain line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the adjustable gain values for DS0 1 are displayed:
dspds0gain 2 1
Line Number : 2
Ds0 Number : 1
InputGain : 0
Output Attenuation: 60
Related Commands
line-num Line number of the DS0 for which you want to display the adjustable gain. In the
range from 1 to 8.
ds0-num DS0 number on which to display adjustable gain. I t c an be a value fr om on e of t he
following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
Command Description
cnfds0gain Configures the adjustable gain for a specified DS0.
cnfgain Configures the adjustable gain for a VISM card.
cnflngain Configures the adjustable gain for all DS0s on a specified VISM card line.
dspgain Displays the adjustable gain for a specified VISM card.
dsplngain Displays the adjustable gain for a specified VISM card line.