5-11
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addcid
•The current DSP template must contain the desired codec type.
This command can be used on an endpoint that has no associated CAS variant. However, if a CAS variant
is specified for the endpoint, it must be Q.50 variant (file q50.o)—the only CAS variant supported by
this command.
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples The following example creates a CID for endpoint 10, L CN 1 40, wi th a CID n um ber o f 10. T he code c
type is 2 (G.711a), profile type is 1 (ITU), profile number is 1 (ITU ), VAD is 1 (on), VAD holdover is
300 milliseconds, type 3 redundancy is 1 (on), CAS transport is 1 (on), DTMF transport is 1 (on), idle
code suppression is 1 (on) and the packet period is 10 mi llise conds .
addcid 10 140 10 2 1 1 1 300 1 1 1 10
Related Commands Command Description
delcid Deletes the association between an endpoint and an LCN/CID pair.
dspcid Displays the argument values of an AAL2 CID on a VISM card.
dspcids Displays all the AAL2 CIDs for a specified LCN on a VISM card.