5-458
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspvoipparams
dspvoipparams
To display the VoIP switching/trunking operating mode parameters, use the dspvoipparams command
in the VoIP switching/trunking operating mode.
dspvoipparams
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines The following parameters are displayed when you use this command:
•DTMF relay status—Displays whether the CAS bits are configured to be relayed to the other
endpoint.
•CAS bits transport status—Displays whether the DTMF tones are configured to be relayed to the
other endpoint.
•VAD timer value—Displays the hangover time before silence compression is invoked.
•Event negotiation policy—None, proprietary, or all.
•Silence insertion descriptor (SID) payload type.
Examples The following example shows that the VoIP switching/trunking operating mode parameters are
displayed:
dspvoipparams
VoIP DTMF RELAY: Off
VoIP CAS BITS TRANSPORT: Off
VoIP VAD TIMER: 250
VoIP EVENT NEGOTIATE POL: proprietary
VoIP SID PAYLOAD TYPE: 13
Related Commands Command Description
cnfvoiptimerparam Configures the holdover time for VAD before silence compression is
activated.
cnfvoiptransparams Configures the VoIP transportation parameters.