5-257
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dellapdtrunk
dellapdtrunk
To delete a Link Access Protocol D channel (LAPD) configured line, use the dellapdtrunk command in
the VoIP switching/trunking operating mode.
dellapdtrunk line-num
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines You must use the dellapd command to delete the corresponding LAPD channel be fo re yo u can de lete
the LAPD trunk.
Examples The following example shows that the LAPD configured line, line number 7, is deleted:
dellapdtrunk 7
Related Commands
line-num Line number to delete. In the range from 1 to 8.
Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
addrudptrunk Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflapdtrunkpvc Assigns the PVC trunk type that carries LAPD m essages for the current VISM
card.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alar m is
encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backhaul RUDP
trunk for a specified session.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LAPD.
dsplapd Displays data about an LAPD.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for the
current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.
dsprtpcnt Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
dsprtpcon Displays the configuration data of a specific static RTP VoIP trunking
connection.
dsprtpcons Displays the configuration data of all static RTP VoIP trunking connections.