5-345
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspds0musicthreshold
dspds0musicthreshold
To display the music on-hold threshold value for a specified DS0, use the dspds0musicthreshold
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspds0musicthreshold line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the VISM card line number 1, DS0 number 1 displays the –50 dB
music on-hold threshold configuration value:
dspds0musicthreshold 1 1
Line Number : 1
Ds0 Number : 1
MusicThreshold: -50
Related Commands
line-num Line number of the channel for which you want to display the DS0 music
on-hold threshold value. It can be in the range from 1 to 8.
ds0-num DS0 number for which you want to display the music on-hold t h reshold
value. It can be a value from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
Command Description
cnfds0musicthreshold Configures the music on-hold threshold for a specified DS0.
cnflnmusicthreshold Configures the music on-hold threshold for all DS0s on a specified line.
cnfmusicthreshold Configures the music on-hold threshold value for the c urren t VISM ca rd.
dsplnmusicthreshold Displays the music on-hold threshold values for the DS0s on a specified
line.
dspmusicthreshold Displays the music on-hold threshold values for the current VISM card .