5-406
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsprsvpsenders
dsprsvpsenders
To display all Resource Reservation Protocol (RSVP)-known path states on the current VISM card, use
the dsprsvpsenders command in the VoIP switching/trunking and VoIP and switched ATM AAL1 SVC
operating modes.
dsprsvpsenders
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking and VoIP and switched ATM AAL1 SVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that all RSVP-known path states on the current VISM card ar e di s play ed :
dsprsvpsenders
Session Sender From To Prot DPort SPort BPS
------------------------------------------------------------------------
0 1 11.11.11.1 12.12.12.1 IP 49152 49152 96000
1 0 12.12.12.1 11.11.11.1 IP 49152 49152 96000
Related Commands Command Description
cnfrsvp Configures RSVP for a specified connection.
cnfrsvprefreshmiss Configures the number of times VISM waits for a missed RSVP minimum
refresh message for a specified connection.
dsprsvpif Displays the RSVP status of a specified connection.
dsprsvpreq Displays the data associated with a specified RSVP request.
dsprsvpreqs Displays all RSVP-known requests on the current VISM card.
dsprsvpresv Displays all data associated with an RSVP bandwidth reservation.
dsprsvpresvs Displays all incoming RSVP-known reservations on the current VISM card.
dsprsvpsender Displays all data associated with a specified RSVP path st ate .