5-148
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfendptcadence
cnfendptcadence
To configure cadence (digit tone) times for an endp oint, us e the cnfendptcadence command in the V oIP
switching/trunking and AAL2 trunking operating modes.
cnfendptcadence endpt-num tone-on-time tone-off-time
Syntax Description
Command Modes VoIP switching/trunking and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that endpoint 20 is configured with 100 m s dig it tone g ener ation ti me
length and 100 ms silence time length between generated tones:
cnfendptcadence 20 100 100
Related Commands There are no related commands.
endpt-num Endpoint number. It can be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144
tone-on-time Length of time (defined in milliseconds) a digit tone is generated. It can be in the
range from 2 to 9999. (Default = 75)
tone-off-time Length of time (defined in milliseconds) silence is maintained between digit tone
generation. It can be in the range from 0 to 9999. (Default = 75)