5-306
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcarddsp
dspcarddsp
To display all card level configuration parameters for both echo cancellation (ECAN) and voice
compression DSPs, use the dspcarddsp command in the VoIP switching/trunking, switched AAL2 PVC,
and AAL2 trunking operating modes.
dspcarddsp
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines The packetization period and default type of service parameters apply to the VoIP switching/trunking
operating mode only.
Examples The following example shows that the card level configuration parameters for ECAN and voice
compression DSPs are displayed:
dspcarddsp
IdlePattern: 0x7f or 0xff
IdleDirection: Both
PacketSize: 80 bytes
DB loss: sixdb
Jitter buffer mode: fixed
Jitter buffer size: forty msec
Adaptive Gain Control: off
Related Commands There are no related commands.