5-111
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcasvar
cnfcasvar
To configure a previously added channel associated signaling (CAS) variant timing parameters, use t he
cnfcasvar command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
cnfcasvar var-name country-code partial-time critical-time interdigit-timeout
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures when using this command.
Examples The following example shows that the var1 CAS variant for the nz country code is configured with a
partial timeout of 10 seconds, a critical timing of 10 seconds, and an MF interdigit timeout of 2 seconds:
cnfcasvar var1 nz 10 10 2
Related Commands
var-name Name of a previously added CAS variant; a text string of 1 to 64 alphanumeric
characters.
country-code The country code of the variant. The value must be a two-character text string.
partial-time The partial dial time (defined in seconds) in the range from 10 to 10000—in
increments of 10.
critical-time The critical timing (defined in seconds) in the range from 0 to 10000—in
increments of 10.
interdigit-timeout The interdigit timeout value for MF digits (def ined in second s) in th e range from
1 to 10.
Command Description
addcasvar Adds a CAS variant to a VISM card.
delcasvar Deletes a CAS variant from a VISM card.
dspcasvar Displays information about CAS variants for a given variant name.