5-457
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspvismparam
cnfco4timer Configures the bearer continuity test CO4 timer value.
cnfcodectmpl Assigns a codec template to an entire VISM card.
cnfcon Configures a connection between a VISM card and an MGX 8000 Series platform
PXM card.
cnfvismip Configures the current VISM card IP address.
cnfvismmode Configures the initial operating mode for a VISM card.
dspcalea Displays the CALEA feature configuration status of the current VISM card.
dspco4timer Displays the bearer continuity test CO4 timer value.
Command Description