5-86
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcac
cnfcac
To enable or disable the connection admission control (CAC) feature on a VISM card, use the cnfcac
command in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnfcac cac-enable
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines If you enable CAC with this command, you can then use the cnfconcac command to enable CAC on
PVCs.
Examples The following example shows that CAC is disabled for the current card:
cnfcac 1
Related Commands
cac-enable Enables or disables CAC. It can be one of the following values:
•1 = On
•2 = Off
Command Description
cnfconcac Enables CAC on an already added connection.