5-328
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcodecparams
dspcodecparams
To display codec parameters, use the dspcodecparams command in the VoIP switching/trunking
operating mode.
dspcodecparams
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines The following data, codec parameters, are displayed when you use this command:
Codec type
xGCP codec string
Packetization period
Preference
IANA registered codec type
Note Because the preference of any codec can be configured regardless of the current co dec t emp la te, a ll
codecs displayed by this command may not be available in the current codec template.
Examples The following example shows that the codec parameters are displayed:
dspcodecparams
codecType codecString pktPeriod (ms) Preference ianaCodecType
------------- ----------- -------------- ----------- -------------
1 - G.711u PCMU 10 7 0
2 - G.711a PCMA 10 8 8
3 - G.726-32K G.726-32 10 5 2
4 - G.729a G729a 10 2 96
5 - G.729ab G729ab 10 1 96
6 - clr chan CCD 10 9 96
7 - G.726-16K G.726-16 10 3 96
8 - G.726-24K G.726-24 10 4 96
9 - G.726-40K G.726-40 10 6 96
Related Commands Command Description
cnfcodectmpl Assigns a codec template to a VISM card.
dspcodectmpls Displays all entries in the codec template table.