5-247
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
delcid
delcid
To delete the association between an endpoint and an LCN/CID pair, use the delcid command in the
AAL2 trunking operating mode.
delcid lcn cid-num
Syntax Description
Command Modes AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the endpoint association for LCN 140 and CID 12 is deleted:
delcid 140 12
Related Commands
lcn The logical channel number of the LCN/CID pair in the range from 131 to 510.
cid-num The channel identification number of the LCN/CID pair in the range from 8 to 255.
Command Description
addcid Adds an AAL2 CID on a VISM card.
dspcid Displays the data of an AAL2 CID on a VISM card.
dsplncids Displays the CID, endpoint, and AAL2 data for a specified line.