5-144
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfds0musicthreshold
cnfds0musicthreshold
To configure the music on-hold threshold for a specified DS0, use the cnfds0musicthreshold command
in the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
cnfds0musicthreshold line-num ds0-num music-thresh
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the VISM card line number 2, DS0 number 30 is configured with a
–45 dB music on-hold threshold value:
cnfds0musicthreshold 2 30 -45
Related Commands
line-num Line number for which you want to configure the music on-ho ld threshold.
In the range from 1 to 8.
ds0-num DS0 number for which you want to configure the music on-hold threshold.
It can be a value from one of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
music-thresh Music on-hold threshold (defined in decibels). It can be in the range from
–70 to –30.
Command Description
cnflnmusicthreshold Configures the music on-hold threshold for all DS0s on a specified line.
cnfmusicthreshold Configures the music on-hold threshold value for the c urr en t V ISM c ard.
dspds0musicthreshold Displays the music on-hold threshold value for a specified DS0.
dsplnmusicthreshold Displays the music on-hold threshold values for the DS0s on a specified
line.
dspmusicthreshold Displays the music on-hold threshold values for the current VISM card.