5-282
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspalm
dspalm
To display the alarms associated with a specified line, use the dspalm command in the VoIP
switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dspalm -ds1 line-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the line 1 alarms are displayed:
dspalm -ds1 1
LineNum:1
LineAlarmState: Alarm(s) On --
XmtRAI
RcvLOS
LineStatisticalAlarmState: No Statistical Alarms
Related Commands
-ds1 The mandatory line-num argument identifier.
line-num Line number of the T1 or E1 line for which you want t o displ ay al arm s. It c a n be i n
the range from 1 to 8.
Command Description
clralm Clears alarms on a specific VISM card line.
dspalms Displays all alarms for a selected line type on a VISM card.