5-63
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
clrscrn
clrscrn
To clear the control terminal screen, use the clrscrn command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
clrscrn
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines After you execute this command, only the current command line prompt appears on the screen.
Examples The following example shows that your control terminal screen is cleared, other than the current
command line prompt:
clrscrn
Related Commands There are no related commands.