5-307
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcasendpts
dspcasendpts
To display data about configured channel associated signaling (CAS) endpoints, use the dspcasendpts
command in the VoIP switching/trunking operating mode.
dspcasendpts
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CAS endpoint configuration data is di splaye d:
dspcasendpts
Endptds0Num CasVarName CasOnTime CasOffTime
----- ------ ---------- --------- ---------
2 2 immd 75 75
5 5 wink 75 75
10 10 wink 75 75
Related Commands Command Description
dspcasvarendpts Displays all endpoints associated with a specified CAS variant name.