5-256
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dellapd
dellapd
To delete an Link Access Protocol D channel (LAPD), use the dellapd command in the VoIP
switching/trunking operating mode.
dellapd line-num ds0-num
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the D channel for line number 2, DS0 number 14 is deleted:
dellapd 2 14
Related Commands
line-num Line number of the channel from which to delete an LAPD, in the range from 1 to 8.
ds0-num DS0 number of the channel from which to delete an LAPD. It can be a value from one
of the following ranges:
•1 to 24 for T1 lines
•1 to 31 for E1 lines
Command Description
addlapd Adds an LAPD from a specified DS0 to a VISM card.
dsplapd Displays data about an LAPD.
dsplapds Displays data about all LAPDs.