5-305
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcalea
dspcalea
To display the Communications Assistance for Law Enforcement Act (CALEA) feature configuration
status of the current VISM card, use the dspcalea command in the VoIP switching/trunking, switched
AAL2 PVC, and AAL2 trunking operating modes.
dspcalea
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CALEA feature is enabled on the current VISM card:
dspcalea
CALEA: enable
Related Commands Command Description
addcon Adds a PVC connection between a VISM card and any SM or PXM card.
cnfcalea Enables or disables the CALEA feature on the current VISM card.
cnfcon Configures a connection between a VISM card and an MGX 8000 Series
platform PXM card.
dspvismparam Displays the current VISM card configuration.