5-90
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcascode
Command Modes AAL2 trunking
Usage Guidelines You must add the line associated with the endpt-num argument value before you use this command.
Examples The following example shows that the idle code is binary 0100 (argument value = 4, so that A = 0, B = 1,
C = 0, D = 0), the seized code is binary 1001 (argument value = 9, so th at A = 1, B = 0, C = 0 , D = 1),
for endpoints 1 to 4:
cnfcascode 1 4 9 4
Related Commands There are no related commands.
seized-code The 4-bit seized code. The value can be in the range from 0 to 15 and represents the
four signaling bits—A, B, C, and D—in binary, as bits 3, 2, 1, and 0 respectively, with
bit 3 the most significant.
endpts-num (Optional) An optional argument value which indicates the last endpoint in a
consecutive range of endpoints. It can be a value from one of the fo llowing r an ges :
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144