5-308
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcasglareattrib
dspcasglareattrib
To display the direction of channel associated signaling (CAS) calls and the glare policy for a specified
endpoint, use the dspcasglareattrib command in the VoIP switching/trunking, switched AAL2 PVC,
and AAL2 trunking operating modes.
dspcasglareattrib endpt-num
Syntax Description
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CAS glare attributes for endpoi nt num ber 204 are d isplay ed :
dspcasglareattrib 204
Ds0IfIndex: 204
Cas Diretionality: incoming
Cas Glare Policy: controlling
endpt-num Endpoint number for which you want to display the CAS glare attributes. It can
be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144