5-352
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplapd
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backha ul R UDP
trunk for a specified session.
dellapd Deletes an LAPD.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LA PD.
dsplapds Displays configuration data about all LAPDs.
dsplapdtrunkpvc Displays the assigned PVC trunk type that carries LAPD trunk messages for
the current VISM card.
dsplapdtrunks Displays the configuration data of all LAPD trunks.
dsprtpcnt Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
dsprtpcon Displays the configuration data of a specific static RTP VoIP trunking
connection.
dsprtpcons Displays the configuration data of all static RTP VoIP trunking connections.
dsprudptrunk Displays the configuration data of a specified ISDN PRI backhaul RUDP
session.
dsprudptrunks Displays the configuration data of all ISDN PRI backhaul RUDP sessions.
Command Description