5-48
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addxgcppersistevt
addxgcppersistevt
To add persistent xGCP (various gateway control protocol) events, use the addxgcppersistevt command
in the VoIP switching/trunking and switched AAL2 PVC operating modes.
addxgcppersistevt event-num pkg-event
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines This command notifies the call agent of the specified event without the need for a xGCP notification
request. There are no persistent xGCP events by default. Only valid xGCP strings (described in the
pkg-event syntax description list) can be configured with this command.
Examples The following example shows that the persistent event index number 1 is added for the voiceband data
package:
addxgcppersistevt 1 g/vbd
event-num The persistent event index package event number in the range from 1 to 64.
pkg-event The xGCP package and event string listed as persistent. It can be one of the
following:
•r/co3 = VISM initiated AAL2 type 3 packet (CO3) network continui ty test
•r/co4 = Network continuity test detect
•g/ft = Fax tone
•g/mt = Modem tone
•g/vbd = Voiceband data
•g/vbdt = Voiceband data termination
•l/hu, bl/hu = On hook
•l/hd, blhd = Off hook
•ms/ans, dt/ans, md/ans, mo/ans = Answer
•ms/sup, dt/sup, md/sup = Setup
•ms/rel, dt/rel, md/rel, mo/rel = Release
•ms/rtc, dt/rlc, md/rlc, mo/rlc = Release complete
•ms/res, dt/res, md/res = Resume
•ms/sus, dt/sus, md/sus = Suspend
•md/awk = Acknowledgment wink
•mo/rbz = Reverse make busy